Logo

 

 

 

 

 

Powder Coating Systems

Parts Pretreatment Systems
Tellkamp Systems, Inc. will work with clients to meet any coating requirement.  Our Powder Coating Systems are engineered to handle a variety of part shapes and sizes.  Systems include the latest in material handling, spray washer, curing oven and wastewater treatment design.


Parts Pretreatment Systems

Spray washers are typically used to prepare parts for the powder coating process.  Multi-stage washers can be set up to operate with Iron Phosphate or Zinc Phosphate, assuring good coating adhesion and corrosion resistance.

Parts Dry-Off & Curing Ovens

Dependent upon production requirements and project constraints, Powder Coating Systems can utilize combination dry-off and curing ovens or separate dry-off and curing ovens.  To allow greater flexibility and throughput, the use of Infrared (IR) ovens is becoming more common on powder systems.


Infrared ovens are typically located at the entrance of the curing oven and they are used to rapidly raise the temperature of the powder coating, causing the material to “gel”.  This speeds up the curing process and also minimizes the possibility of cross contamination in the convection curing oven.

Parts Dry-Off and Cureing Ovens

Wastewater Treatment Systems

A variety of options are offered for wastewater treatment.  Systems can be designed for pH neutralization and solids removal, metals precipitation (chrome phosphate, zinc phosphate) and Zero Discharge.


A recent innovation in wastewater treatment is the development of Zero Discharge Systems.  Using a Zero Discharge System eliminates the requirement for connection to an evaporation system or municipal sewage line.  Benefits of Zero Discharge include decreased water and chemical additive usage.

 

TELLKAMP SYSTEMS, INC.
Santa Fe Springs, California
(562) 802-1621

 

Tellkamp Systems, Inc.